Inicio > Security > Detection system for vehicles

Detection system for vehicles

Sistemas de detección de vehículos

Access options

  • Entrance or exit controlled (one way direction).
  • Controlled entrance and automated exit (two way direction).
  • Entrance and exit controlled (two way direction).

Four control loops to the best security

  • A1 and A2, presence loops, detect a vehicle presence and allow the use of magnetic cards and remote control.
  • B1 and B2, security loops that avoid the pop-up of the bollards during vehicle presence.

Operations

1. Entrance or exit controlled (one way)

Possibility of access in one direction (input or output). The vehicle must be physically on the presence loop, its presence drives the pop-down signal allowing passage through the security loops. Immediately after the passage of the vehicle, the bollard will rise automatically timed.

2. Entrance and exit controlled (two way)

Possibility of access in both directions (entry/exit from the same access). The vehicle must be physically on the presence loop, which turns on the pop-down signal, continuing physically over the security loops. Immediately after passage of the vehicle, the bollard will rise, automatically timed. If the vehicle is physically on the presence loop from the exit direction, it follows the same manoeuvre in the opposite direction.

3. Entrance controlled and automatic exit

Possibility of access in both directions (entry/exit at the same access). The vehicle must be physically on the presence loop, turning on the pop-down signal, and continue over the security loops. Immediately, the bollard will rise, automatically timed. If the vehicle is on the presence loop from the exit direction, the bollard will pop-down automatically without having to switch on any signal.

Photo gallery